Johns Manville
Denver, CO 80202
Featured Project Return to Projects List
Iconic Louisville Building Installs
Project Information
- Project Location:
- Louisville, KY
- Status:
- Completed
- Structure Type:
- Office Building
References
- General Contractor:
- American Roofing & Metal Co. Inc.
Scope Of Work
Description: The six-story American Life & Accident Insurance Co. building was designed by well-known
German architect Ludwig Mies van der Rohe, who died during its construction. Considered his last piece of art,
it has become a landmark in Louisville and can be appreciated from many of the taller buildings in downtown. Its
environmentally conscious owner initially wanted to replace its ailing 20-year-old roof with a two-ply modified
bitumen system with a cool roof coating. Before tear-off started, however, the owner asked American Roofing &
Metal (AR&M) in Louisville to research a vegetative roof option, and very quickly the top coat was replaced with
this “greenest of green” vegetative solution. The JM modified bitumen system remained.
Challenges: The building is located adjacent to a popular riverfront park, the site of various weekend festivals, so
tear-off and staging had to be coordinated around the loading and unloading of trucks bringing in festival supplies
and the heavy foot traffic in and out of the park. A worker was stationed on the ground at all times as the existing
16,384-square-foot roof came off and traveled down a specially devised chute to a bin behind a temporary safety
fence. During installation of the new roof, special attention was needed at the perimeter and at roof penetrations
because of the structure’s negative air pressure, in order to keep roofing vapors from being drawn back into the
building.
Solution: “When plans changed, the JM SBS modified bitumen system still remained the very best solution under
a vegetative system,” says Troy Huffman, AR&M’s project manager. “It’s extremely watertight, durable and will
hold up for years. Plus, the stainless steel leak detection system laid over the DuraBoard insulation allows any future water leaks to be pinpointed to the exact square inch.” JM’s cold-applied Urethane Insulation Adhesive was
used to adhere the insulation and roof board, as well as under the base sheet within three feet of all penetrations
and along the perimeter. The remaining plies of base sheet and the cap sheet were heat welded and AR&M’s
“green team” installed Green Roof Solutions’ multilayer vegetative roof system. The job started in May and
finished in August on time and under budget, making AR&M’s first vegetative roof system installation a success!